PARASIT STUDIO
  • DIY GUITAR EFFECTS
    • Original Effects
    • Building blog
    • DIY Gallery
    • Stripboard layouts
    • Articles
  • SHOP
  • BUILD DOCS
  • ABOUT

Cherub Chorus

2/28/2015

11 Comments

 
Here is another nice PT2399-based chorus, a bit similar to the Dimension P chorus I posted earlier, but uses a single delay chip insted of two.
Picture
11 Comments
Steve
3/10/2015 04:17:09 am

This looks really cool!

Reply
Nuno
4/14/2017 01:47:19 pm

Hello, can you explain where should i wire the rate led cathode ? Thanks

Reply
Fredrik Lyxzén link
4/19/2017 12:42:40 pm

wire the LED cathode to ground
cheers / Fredrik

Reply
Nuno
4/19/2017 01:08:24 pm

Do you usually wire to the ground in the switch (so that the rate led only turn on with the pedal) or to the board ground (always on)? Thanks

Fredrik Lyxzén link
5/6/2017 03:51:36 am

I usually wire rate LED's ground to the board or a jack so that they are always on. It's nice to be able to see which tempo it is set, before turning the pedal on (especially in a live situation).

Reply
Joseph Maxwell
5/7/2017 03:58:46 pm

Hi, i recently built this and im finding that i get a few millisecond delay when the mix is up full and a volume drop else where when the effect is on. Is this the case or have i got some troubleshooting to do?

Reply
Fredrik Lyxzén link
5/15/2017 01:14:29 am

Hi Joseph,
It not supposed to have a volume drop or a delay, so I guess you have some troubleshooting to do. I suggest making a thread about it in the tagboardeffects forum and post pictures of your build, and I'm sure people there will help out. :) / Fredrik

Reply
Dylan A Stratman
4/8/2020 01:28:16 pm

Hey Joseph. I just built this today and am having the exact same issues you were having with yours. Wondering if you ever got it figured out?

Reply
Phil Gemmell
4/8/2020 03:56:20 pm

I never resolved the issue. I built a Dimension P instead.

Jonathon Yi
4/3/2018 09:56:25 am

I built my Cherub into the same enclosure as your Electric Druid Tap Trem, running the Cherub before.

I noticed there's a volume drop when the mix knob is in the middle position and with the Druid Tap Trem disengaged.

I'm curious if there's some weird phase issue that's happening with the mix knob? Any thoughts?

Reply
Dylan A Stratman
4/10/2020 06:33:14 am

Hey Phil, I also built a dimension p chorus before this but am having an issue with one of the switches if you wouldn’t mind taking a look at it here: http://tagboardeffects.blogspot.com/p/forum.html?m=1
I could also upload a video clip to help you get the idea of the issue. Much thanks

Reply



Leave a Reply.

    vero layouts

    All the layouts are Verified unless noted.

    Archives

    February 2018
    October 2017
    September 2015
    June 2015
    April 2015
    February 2015
    December 2014
    November 2014
    October 2014
    September 2014
    August 2014
    July 2014
    June 2014
    May 2014
    April 2014
    March 2014

    Categories

    All
    Amps
    Boosters
    Chorus
    Compressor
    Filters
    Fuzz
    Noise
    Octave Down
    Overdrive & Distortion
    Phaser
    Pro Audio
    Ringmods
    Tremolo
    Utility

    RSS Feed

  • DIY GUITAR EFFECTS
    • Original Effects
    • Building blog
    • DIY Gallery
    • Stripboard layouts
    • Articles
  • SHOP
  • BUILD DOCS
  • ABOUT